Product presentation:

Product Description

Properties ：  

Excellent weatherability.
Excellent colour retention.
Excellent waterproofing performance.
The paint film is stronger.
Keep paint film clean and beauty. 

Usage：

Used for all kinds of buildings in all over the country: senior apartment, hotel, school, office building and factory building.

Tech data：

Ingredients / Silicon acrylate, titanium dioxide, extenders, pigments,additives and deionized water.
Gloss level / Matte
Theoretial coverage / 10 ㎡/L/Coat
Drying time / Surface dry：1hr (Air temperature: 23°C, Relative humidity: 50%)
                        Recoat : 4hr (Air temperature : 23°C, Relative humidity: 50%)
Volume solid / 37.5% (after colour mixing will affect the solid content)
Density / 1.3 kg/L (influence proportion after colour mixing)
Weather Resistance / Excellent (excellent grade, according to GB/T9755-2014 synthetic resin emulsion exterior paint)
Safety / No added Pb and Hg
Colour / White, colour-adjustable (accroding to 3D color card)

Applications ：

Tools / Paint brush, roller, spray gun
Thinner / There is no need to dilute, such as the base absorption is very strong, can add water ＜10% to dilute
Wet film thickness / Theoretical value: about 100 microns (1 coat)
Dry film thickness / Theoretical value: about 37 microns (1 coat)
Conditions / Air temperature: ＞8°C , Relative humidity: <85%
Cleaning / Rinse with fresh water immediately after application
Notes / Don't apply under direct sunlight

Packing ：

15L

Storage ：

Keep in cool and dry place, avoid from frost

Application

Surface preparations：
Interior wall putty ：

1.New concrete must be maintained for 30 days.
2. Remove the looseness and crystal salt.
3. Fill the fissure and trap with appropriate filler.
4.The surface should be clean and clean before construction.
Powdered surface：

1.Remove dust as much as possible.
2.Brush the diluted CapaSol SF.
Moldy surface：

1. Wipe the mold.
2. Brush again wash water, to be dry 24-48 hours, brush once again dilute the Dragon Fort seal primer. 

Method of application：

a. Read the instruction before application.
b. Stir well before applying.
c. Follow the instructions to add a proper amount of water. Do not overdose and stir evenly.
d. Avoid over loading of paints on tools.
e. Wash tools immediately after applications
f . Do not fill the thinned paints into the packing drum.

Painting system：

CapaSeal/CapaGrund(1 coat)+CapaDurable(2 coats)

Advice

SHE：

This product conforms to the National Standard GB/T9755-2014 "synthetic resin emulsion wall paint" (excellent)Products), GB24408-2009 "hazardous material limit" (water-based external wall paint) in architectural exterior wall coatings.
It is our principle to provide high standard of safety, health and environmental information. We will provide materials safety data free of charge as well as related information.

Information：

1. Please follow BS6150:1991 standard for architectural coating applications and BS8000:1989 for site instruction.
2. Shelf life : 24 months in unopened condition.
3. Above information is provided by Caparol (China) Ltd, we ensure the accuracy of the information provided. However due to the application conditions are not controllable, there may be variance in end result.
4. For further enquiry, please contact our company. Please make sure the information is updated before application. The above information was released in Jan 2018. Caparol (China) Ltd. reserve the right to update the above information without notice in advance.

Trademark declaration / Caparol is the trademarks belong to DAW SE.

Company address /  CAPAROL (CHINA) LTD.
25F, Block B Kingboard Square, 505 Guangming Road,
Huaqiao Economic Development Zone, Kunshan, Jiangsu, 215332

Tel：

0512-86183333

Fax：

0512-86183311

www.dawchina.com