Product presentation:

Product Description

Properties ：  

Excellent resistance to alkali, salting-out resistance (according to JG/T210-2007 "building external walls with primer")
Excellent adhesion
Good permeability
Can be used with all kinds of exterior paint

Usage：

Can be used for external cement mortar, concrete, various putty wall, or direct brush on plaster board, cement fiber board.

Tech data：

Ingredients / Acrylic emulsion, titanium dioxide, extenders, additives and deionized water.
Gloss level / Matte 
Theoretial coverage / 10 ㎡/L/Coat
Drying time / Surface dry：1hr (Air temperature: 23°C, Relative humidity: 50%)
                        Recoat : 4hr (Air temperature : 23°C, Relative humidity: 50%)
Volume solid / 37%
Density / 1.44 kg/L (influence proportion after colour mixing)
Weather Resistance / Excellent (excellent grade, according to GB/T9755-2001 synthetic resin emulsion exterior paint)
Safety / No added Pb and Hg
Colour / White

Applications ：

Tools / Brush, roller
Thinner / There is no need to dilute, such as the base absorption is very strong, can add water ＜10% to dilute
Wet film thickness / Theoretical value: about 100 microns (1 coat)
Dry film thickness / Theoretical value: about 37 microns (1 coat)
Conditions / Air temperature: ＞8°C , Relative humidity: <85%
Cleaning / Rinse with fresh water immediately after application
Notes / Don't apply under direct sunlight

Packing ：

15L

Storage ：

Keep in cool and dry place, avoid from frost

Application

Surface preparations：
Interior wall putty ：

1.New concrete must be maintained for 30 days.
2.Remove the looseness and crystal salt.
3.Fill the fissure and trap with appropriate filler.
4.The surface should be clean and clean before application.
Powdered surface：

1.Remove dust as much as possible.
2.Brush the diluted CapaSol SF.
Moldy surface：

1. Wipe the mold.
2. Brush again wash water, to be dry 24-48 hours, brush once again dilute the Dragon Fort seal primer. 

Method of application：

a. Read the instruction before application.
b. Stir well before applying.
c. Follow the instructions to add a proper amount of water. Do not overdose and stir evenly.
d. Avoid over loading of paints on tools.
e. Wash tools immediately after applications
f . Do not fill the thinned paints into the packing drum.

Painting system：

After the surface treatment on the base surface, direct construction of CapaSeal, and then the application of all kinds of capa wall middle or surface products

Advice

SHE：

The products completely accord with National Standards JG/T210-2007 "building external walls with primer, GB24408-2009" building exterior wall coating of harmful material set limit to "(water-based wall paint primer).
It is our principle to provide high standard of safety, health and environmental information. We will provide materials safety data free of charge as well as related information.

Information：

1. Please follow BS6150:1991 standard for architectural coating applications and BS8000:1989 for site instruction.
2. Shelf life : 24 months in unopened condition.
3. Above information is provided by Caparol (China) Ltd, we ensure the accuracy of the information provided. However due to the application conditions are not controllable, there may be variance in end result.
4. For further enquiry, please contact our company. Please make sure the information is updated before application. The above information was released in Jan 2018. Caparol (China) Ltd. reserve the right to update the above information without notice in advance.

Trademark declaration / Caparol is the trademarks belong to DAW SE.

Company address /  CAPAROL (CHINA) LTD.
25F, Block B Kingboard Square, 505 Guangming Road,
Huaqiao Economic Development Zone, Kunshan, Jiangsu, 215332

Tel：

0512-86183333

Fax：

0512-86183311

www.dawchina.com