Product presentation:

Product Description

Properties ：  

Dry paint film with good washability resistance
Special effect mildew formula, can effectively inhibit the growth of mold
Good opacity (superior products, according to GB/T 9756-2009 "synthetic resin emulsion interior wall paint").
Odorless, in line with environmental requirements (VOC not detected,according to GB 18582-2008) "interior decoration.
Repair materials interior wall paint harmful substances "(water-based wallpaint).
Dense paint film to reduce dirt adhesion.

Usage：

Specially designed for interior decoration of luxurious apartment, suitable for residential, hotel, school, office building and other projects through the table Interior treatment of the wall. Can also be used in kindergarten, hospital, the elderly center for easy cleaning.

Tech data：

Ingredients / Acrylic emulsion, titanium dioxide, extenders, pigments,additives and deionized water.
Gloss level / Matte to low light, depending on the colour
Theoretial coverage / 12.5 ㎡/L/Coat
Drying time / Surface dry：1hr (Air temperature: 23°C, Relative humidity: 50%)
                        Recoat : 12hr (Air temperature : 23°C, Relative humidity: 50%)
Volume solid / 43%
Density / 1.46 kg/L (influence proportion after colour mixing)
Weather Resistance / Good
Safety / No added Pb and Hg
Colour / White, colour-adjustable (accroding to 3D color card)

Applications ：

Tools / Paint brush, roller, spray gun
Thinner / Dilute with clear water, dilute ratio of 5-10%
Wet film thickness / Theoretical value: about 80 microns (1 coat)
Dry film thickness / Theoretical value: about 35 microns (1 coat)
Conditions / Air temperature: ＞8°C , Relative humidity: <85%
Cleaning / Rinse with fresh water immediately after application
Notes / Don't apply under direct sunlight

Packing ：

15L

Storage ：

Keep in cool and dry place, avoid from frost

Application

Surface preparations：
Interior wall putty ：

1.Putty completely dry, grinding with fine sandpaper to remove dust
2.If the request is more durable, brush the diluted CapaSol SF before scraping the putty.
3.Putty should not be too soft.
Powdered surface：

1.Remove dust as much as possible.
2.Brush the diluted CapaSol SF.
Moldy surface：

1. Wipe the mold.
2. Brush again wash water, to be dry 24-48 hours, brush once again dilute the Dragon Fort seal primer. 

Method of application：

a. Read the instruction before application.
b. Stir well before applying.
c. Follow the instructions to add a proper amount of water. Do not overdose and stir evenly.
d. Avoid over loading of paints on tools.
e. Wash tools immediately after applications
f . Do not fill the thinned paints into the packing drum.

Painting system：

After the surface treatment on the base surface, direct construction of CapaPrimer, and then the construction of all kinds of Capa interior wall paint.

Advice

SHE：

This product meets the National Standard GB/T 9756-2009 "synthetic resin emulsion interior wall paint"; GB18582-2008 "indoor decoration decoration material inside wall coating harmful material limit" (water based wall paint).
It is our principle to provide high standard of safety, health and environmental information. We will provide materials safety data free of charge as well as related information.

Information：

1. Please follow BS6150:1991 standard for architectural coating applications and BS8000:1989 for site instruction.
2. Shelf life : 24 months in unopened condition.
3. Above information is provided by Caparol (China) Ltd, we ensure the accuracy of the information provided. However due to the application conditions are not controllable, there may be variance in end result.
4. For further enquiry, please contact our company. Please make sure the information is updated before application. The above information was released in Jan 2018. Caparol (China) Ltd. reserve the right to update the above information without notice in advance.

Trademark declaration / Caparol is the trademarks belong to DAW SE.

Company address /  CAPAROL (CHINA) LTD.
25F, Block B Kingboard Square, 505 Guangming Road,
Huaqiao Economic Development Zone, Kunshan, Jiangsu, 215332

Tel：

0512-86183333

Fax：

0512-86183311

www.dawchina.com